SMA
STRAWCLAW KIT FOR CNH MIDSERIES - 2 PIECE KIT WITH HARDWARE REPLACES 442832A1
SKU: 300-711080
For 715, 815, 915, 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588, 5088, 5130, 5140, 6088, 6130, 6140,7088, 7130, 7140
In stock, 11 units
For 715, 815, 915, 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588, 5088, 5130, 5140, 6088, 6130, 6140,7088, 7130, 7140
Sale price$62.34
SMA
STREAMJET SOLID STREAM NOZZLE - STAINLESS STEEL
SKU: 878-TP0006SS
In stock, 145 units
Sale price$9.98
SMA
STREAMJET SOLID STREAM THREADED NOZZLE - STAINLESS STEEL
SKU: 878-H14USS0006
In stock, 11 units
Sale price$13.32
SMA
STRIPPER TOOTH FOR AMADAS
SKU: 804-7028
4-3/8" wide, 6-1/2" long from center of the coil.
In stock, 3000 units
4-3/8" wide, 6-1/2" long from center of the coil.
Sale price$3.12
SMA
STRUT DOOR
SKU: 1280263C1
Strut for door. Overall Length: 12.97", Piston Stroke: 6.29". Tractors: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, MX180, MX200, MX210, MX220, MX230, MX240, MX255, MX270, MX285.
Sold out
Strut for door. Overall Length: 12.97", Piston Stroke: 6.29". Tractors: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, MX180, MX200, MX210, MX220, MX230, MX240, MX255, MX270, MX285.
Sale price$20.85
SMA
STRUT DOOR
SKU: 144947A2
Strut for door. Overall length: 17.68", Piston Stroke: 9.23". Tractors: 3210, 3220, 3230, 4210, 4220, 4230, 4240.
In stock, 12 units
Strut for door. Overall length: 17.68", Piston Stroke: 9.23". Tractors: 3210, 3220, 3230, 4210, 4220, 4230, 4240.
Sale price$27.72
SMA
SUBSOILER POINT 1 INCH X 2-1/2 INCH X 12 INCH BOOTED/CAPPED FOR JD
SKU: 972-41B2512JDC
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
In stock, 74 units
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
Sale price$67.03
SMA
SUBSOILER POINT 1"X2-1/2"X12" BOOTED FOR JD
SKU: 972-41B2512JD
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
In stock, 12 units
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
Sale price$42.86
SMA
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
In stock, 42 units
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sale price$31.66
SMA
SUBSOILER POINT BOOTED KMC
SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
In stock, 11 units
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
Sale price$25.84
SMA
SUBSOILER POINT CAPPED FOR JD
SKU: 972-412013JDC
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
In stock, 34 units
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sale price$56.28
SMA
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412013JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
In stock, 23 units
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Sale price$31.56
SMA
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412512JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
In stock, 15 units
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
Sale price$37.36
SMA
SUBSOILER POINT-LILLISTON 132
SKU: 023-15485
Booted 1" thick, 2-1/2" wide, 12" long
In stock, 14 units
Booted 1" thick, 2-1/2" wide, 12" long
Sale price$37.96
SMA
SUCTION GUN
SKU: 975-W54220
Suction Gun - No priming necessary - Perfect for transmissions, differentials, gear cases, lower units, and crankcases - 12" flexible hose - 1 pint capacity.
In stock, 11 units
Suction Gun - No priming necessary - Perfect for transmissions, differentials, gear cases, lower units, and crankcases - 12" flexible hose - 1 pint capacity.
Sale price$12.90
SMA
SUPER DUTY IMPACT WRENCH - 1/2"
SKU: 975-M625
built-in Air Regulator, 550 ft/lbs., 1/4" inlet, 3/8" Hose size, 90 PSI,8 CFM, 7000 RPM.
Only 1 unit left
built-in Air Regulator, 550 ft/lbs., 1/4" inlet, 3/8" Hose size, 90 PSI,8 CFM, 7000 RPM.
Sale price$130.01
SMA
SUPER ROLLER FOR HYPRO ROLLER PUMPS
SKU: 449-10050004
Used on 6500, 7560, 7700 Series Roller Pump
In stock, 38 units
Used on 6500, 7560, 7700 Series Roller Pump
Sale price$3.67
SMA
SUPPORT FRONT AXLE
SKU: C7NN3010F
Front axle center support. 2 inch hole. Tractors: 2000 (except 2300, 2310), 2100, 2110, 3000 (except 3300, 3310), 3100, 4100, 4110, 4140 (1965-1975), 2600 (except 2600N, V), 3600 (except 3600N, V), 3900, 4600SU, 231, 333, 335, 531 (1975-1981), 2610 (except 2610N), 2910, 3910, 230A, 234, 334, 335, 530A (1981-2/1990).
In stock, 85 units
Front axle center support. 2 inch hole. Tractors: 2000 (except 2300, 2310), 2100, 2110, 3000 (except 3300, 3310), 3100, 4100, 4110, 4140 (1965-1975), 2600 (except 2600N, V), 3600 (except 3600N, V), 3900, 4600SU, 231, 333, 335, 531 (1975-1981), 2610 (except 2610N), 2910, 3910, 230A, 234, 334, 335, 530A (1981-2/1990).
Sale price$122.77
SMA
SWEEP PLAIN HI-SPEED 1/4"X14"
SKU: 686-14HSS4
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
In stock, 145 units
Made in the USA. 1/4" thick 54° angle wrap around shank punched with 3 holes - 2 on 2" centers for 7/16" plow bolts and one in center for 5/8" carriage bolt - Order in multiples of 5.
Sale price$25.79