| Interchange | 82194, |
| Net Weight (lbs) | 0.24 |
| Height | 1.30 |
| Product Link1 | https://farmstoreasset.s3.amazonaws.com/Specs/82194.pdf |
| Container Size | 3.5 oz. tube, carded |
| Pack | 12 |
| Instruction | DIRECTIONS: For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. |
PermatexÒ Ultra GrayÒ Gasket Maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable “formed-in-place” gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed), and maintains outstanding oil, water-glycol resistance. OEM Specified.
PRODUCT BENEFITS
- High load resistance
- Improved oil resistance
- Sensor safe, non-corrosive
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Non-flammable, Non-toxic
- Low odor
TYPICAL APPLICATIONS
- Valve covers
- Transmission pans
- Oil pans
- Timing gear covers
- Differential covers