1/2” x 3” bent hitch pin for use with punched shank
ITEM#: 873-7111
Hitch Pin 1/2" x 3" Usable Length Qty: (1 Pc)
15.7" shank with punched holes and crimped-on point. 3/4" thick, 2-1/2" wide, hole spacing is 1-1/2" c-c, 3 holes, 1/2" diameter, Shank is made from 5160 spring steel
ITEM#: 873-103107
15.7" shank with punched holes and crimped-on point. 3/4" thick, 2-1/2" wide, hole spacing is 1-1/2" c-c, 3 holes, 1/2" diameter, Shank is made from 5
15.7" rear-notched shank with crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Atlas.
ITEM#: 873-103109
15.7" rear-notched shank with crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Atlas.
17.5" front 3 notch shank with crimped-on point. Shank is 3/4" thick, 2-1/2" wide. Upper slot is 3-5/8" from top, and bottom slot is 7-1/8" from top. Shank and point are heat-treated. Fits Modern and Hardee.
ITEM#: 873-103110
17.5" front 3 notch shank with crimped-on point. Shank is 3/4" thick, 2-1/2" wide. Upper slot is 3-5/8" from top, and bottom slot is 7-1/8" from top.
23 SERIES FLEX-PIN
ITEM#: YRPH23
Fabco 23 series flex-pin for bucket tooth.
156 SERIES ROLL-PIN
ITEM#: YP156F
Fabco 156 series roll pin for bucket tooth.
23 SERIES ADI STD CAST
ITEM#: Y8330
Fabco 23 series austempered ductile iron standard cast bucket tooth.
CUTTING EDGE
ITEM#: CE12496FSB
Cutting edge, weld-on base, 1/2" x 4" x 96". Flat single bevel edges.
156 SERIES LONG CAST
ITEM#: YAD156L
Fabco 156 series standard long cast bucket tooth. Top pin/cast,single penetrator.
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap)
ITEM#: 693-2D5
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WA
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap)
ITEM#: 693-2D5BE
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WA
CUTTING EDGE
ITEM#: CE12696FSB
Cutting edge, weld-on base, 1/2" x 6" x 96". Flat single bevel edges.
1-3/4 SCARIFIER TOOTH W/ HOLES
ITEM#: Y8075
Fabco 1-3/4" scarifier bucket tooth with holes.
156 SERIES STD CAST
ITEM#: YAD156
Fabco 156 series standard cast bucket tooth. Top pin/cast, single penetrator.
2A SERIES FABR BUCKET TEETH
ITEM#: Y8002A
Fabco 2A series standard fabricated bucket tooth.